Rules of conduct

Welcome at the Cafeteria! Here you can exchange ideas with Coticule users
from around the globe.
Please make sure you understand our forum rules!

Read more …
 
Avatar
RazorEmporium
Posts: 3
Hello everyone! New to the forum here, not new to forums or shaving though! :P Wanted to let you all know that we wrote an article on finding and restoring vintage straight razors over at The Art of Manliness. While we don't go into honing in this article, I hope that it helps to grow the Straight Razor Community, which is a goal we should all have!

Thought I'd share- good to be here and look forward to learning more about this place and you all!

http://artofmanliness.com/2011/04/22/how-to-buy-and-restore-vintage-straight-razors/
2011-06-15 23:33
Avatar
Bart Torfs (Bart)
Associate
From: Belgium
Posts: 4689
Hi Matt. Let me be first to welcome you here on Coticule.be.

Matt and I go a couple years back, when we were I was still active on another shaving forum and Matt was making his first steps in the world of straight razor shaving. The link to Matt's RazorEmporium has been add to our recommended websites section since the early days of Coticule.be. I'm glad you finally decided to show your face around here.;)

Enjoy your membership, my friend!

Bart.
Then the light shone, trumpets sounded and I got to the other side, where men shave with smiles on their faces, razors pop hairs, and a continuous choir singing «~~Keen and Smooth~~» is heard everywhere. (Matt)
http://www.artisanshaving.org
2011-06-16 00:41
Avatar
Bart Torfs (Bart)
Associate
From: Belgium
Posts: 4689
Nearly forgot:

Congratulations on the article, of course. :thumbup:
Then the light shone, trumpets sounded and I got to the other side, where men shave with smiles on their faces, razors pop hairs, and a continuous choir singing «~~Keen and Smooth~~» is heard everywhere. (Matt)
http://www.artisanshaving.org
2011-06-16 00:42
Avatar
danjared
Associate
From: United States
Posts: 1000
I briefly looked at the article. I'd love to see a note about overheating not as an "important tip". To be honest, I don't see that as a tip so much as an essential fact, especially when using power tools is suggested so casually in the article. The "tip" is also mentioned several paragraphs after talking about power tools. Personally, I wouldn't even mention the use of power tools. I'd hate to see a bunch of overeager readers go out and unintentionally damage a bunch of razors (or hurt themselves). There's much that can be done by hand, which also teaches several restoring skills in a more conducive learning environment. I personally think that such power tools should be left to the more experienced.
2011-06-16 16:55
Avatar
jeness
From: Hungary
Posts: 105
icondanjared:
I briefly looked at the article. I'd love to see a note about overheating not as an "important tip". To be honest, I don't see that as a tip so much as an essential fact, especially when using power tools is suggested so casually in the article. The "tip" is also mentioned several paragraphs after talking about power tools. Personally, I wouldn't even mention the use of power tools. I'd hate to see a bunch of overeager readers go out and unintentionally damage a bunch of razors (or hurt themselves). There's much that can be done by hand, which also teaches several restoring skills in a more conducive learning environment. I personally think that such power tools should be left to the more experienced.


+1

No one should touch a straight razor to power tools before he restored about 3-5 solely by hand, or has knowledge in metal work.
2011-06-16 17:52
Avatar
Robin
Posts:
Interesting. A few small remarks.

First, Dubl Duck was not a manufacturer (cf http://straightrazorplace.com/srpwiki/index.php/Bresduck_Inc.). Links to the MFG entries in SRP's razor database would have been useful.

Second, replacing original scales or original blade finishes is not restoration but customisation. Very, very few people are capable of restoring a razor (conservation or full restoration), while any trained monkey can customise a razor.

Last, I would not have mentioned power toys like a Dremel without linking to a video that shows a) said powertoys in action and b) the devastating effects they can have on blades.

Regards,
Robin
2011-06-16 18:07
Avatar
Aquanin
Posts: 71
Cool Friodur with Burl Scales ;)

Interesting article Matt, Thanks.
2011-06-16 18:13
Avatar
Jim
Posts: 20
Pedantry to follow, you've been warned!

I think that replacing scales with period scales for the same model of razor wouldn't be considered customization, at least not in the sense that it's like adding ninja turtle scales. Perhaps it's not restoration either...something in between?

My point is that I don't personally see the fault in replacing beat-up Wostenholm scales attached to a good blade with well-preserved Allen scales attached to a rusty nail.

Regards,
Jim
One punctuation mark is sufficient to end a sentence.
2011-06-16 19:22
Avatar
Torben Pedersen (torbenbp)
Researcher
From: Denmark
Posts: 1005
I`d rather put a fine blade on some unoriginal scales than not use the blade at all...

However restoring razors -thus bringing them back to original - is as Robin said,something quite else. It aint easy,demands respect for it`s origin and quite some knowledge. This is best achieved by "faulty" restorations - thus gaining experience and breaking some blades:cry: - unless you are highly skilled or blessed by the Almighty Razor God...I`m neither. So a few blades got seriously damaged..both by power toys and elbowgrease.. Looking in the back mirror,it should have been done differently. BUT it was a learning process,and something you cant read in a manual.

Just finished my best restore so far: A Bengali wedge with horn scales,standard equipment to the Royal British Forces during WW1 I believe. The scales were broken,the blade completely covered in rust and pitting. Now,I`m rather proud to say it`s back to it`s original (used) state.

Though here are many sound advices in the article,only personal preferences and experiences determines whats right and wrong.

But God I wish I hadnt given that Wostenholm "Pipe" razor a satin finish!!!

Torbs
Torben Pedersen
Moellevaenget 15 2th
7900 Nykoebing Mors
Denmark
"If it works dont break it..?"
2011-06-16 19:59
Avatar
Bart Torfs (Bart)
Associate
From: Belgium
Posts: 4689
Some of these replies suffer from tunnel vision.

The article is written for an audience that is not necessarily knee-deep into straight razor afficionadism. I think the average reader at The Art Of Manliness is a guy who would not consider the act of picking up an abandoned razor at a flea market or other Bays, and subsequently messing with it in an attempt to restore function, as an activity that calls for fear to do injustice! to the Holy Object of our Obsession.
The mere thought that We, Razor Aficionados, should have the prerogative to be judgemental whenever someone might do something to a Razor that We would not consider the best course of action, or simply not the action that we would have chosen ourself, is something that I frown upon. It remembers me to the necessity for our annual forum shutdown in August. Time to get out the cave and see the horizon... Breath my friends, they air is full of wonder.

By the way 1:
iconRobin:
Links to the MFG entries in SRP's razor database would have been useful.

Links to SRP are never useful. What they accomplish is that they reinforce a forum where a few guys monopolize the truth in function of their own petty agendas (read: business interests). As useful (a fraction of) the information found there may be, it preys upon too many former members who've been silently banned when it so suited those that hold power buttons over there. And that information is mixed with nonsense that serves to lure newly arriving straight razor users into a grotesque kind of consumerism, that I consider far more blasphemous to the nature and tradition of these old-fashioned tools, than the replacement of scales by new ones with unhistorical colors.

By the way 2:
I have brought my share of razors back to functional duty. I think I tried the use of elbow power for 2 minutes, before I reached for something that had an electrical cord attached. Can't say I ever looked back. But I would never patronize a fellow who chooses to do it all by hand.

By the way 3:
Matt shared a link to the article he posted on the Art Of Manliness, because I invited him to do so. Thought I'd mention this, before anyone got the idea he came here only to shamelessly plug this link and business.

By the way 4: in case not everyone noticed it yet. We're in the habit of speaking frankly, over here.

Kind regards,
Bart.
Then the light shone, trumpets sounded and I got to the other side, where men shave with smiles on their faces, razors pop hairs, and a continuous choir singing «~~Keen and Smooth~~» is heard everywhere. (Matt)
http://www.artisanshaving.org
2011-06-16 20:20
Avatar
danjared
Associate
From: United States
Posts: 1000
iconBart:
Some of these replies suffer from tunnel vision.

The article is written for an audience that is not necessarily knee-deep into straight razor afficionadism. I think the average reader at The Art Of Manliness is a guy who would not consider the act of picking up an abandoned razor at a flea market or other Bays, and subsequently messing with it in an attempt to restore function, as an activity that calls for fear to do injustice! to the Holy Object of our Obsession.
The mere thought that We, Razor Aficionados, should have the prerogative to be judgemental whenever someone might do something to a Razor that We would not consider the best course of action, or simply not the action that we would have chosen ourself, is something that I frown upon. It remembers me to the necessity for our annual forum shutdown in August. Time to get out the cave and see the horizon... Breath my friends, they air is full of wonder.

By the way 1:
iconRobin:
Links to the MFG entries in SRP's razor database would have been useful.

Links to SRP are never useful. What they accomplish is that they reinforce a forum where a few guys monopolize the truth in function of their own petty agendas (read: business interests). As useful (a fraction of) the information found there may be, it preys upon too many former members who've been silently banned when it so suited those that hold power buttons over there. And that information is mixed with nonsense that serves to lure newly arriving straight razor users into a grotesque kind of consumerism, that I consider far more blasphemous to the nature and tradition of these old-fashioned tools, than the replacement of scales by new ones with unhistorical colors.

By the way 2:
I have brought my share of razors back to functional duty. I think I tried the use of elbow power for 2 minutes, before I reached for something that had an electrical cord attached. Can't say I ever looked back. But I would never patronize a fellow who chooses to do it all by hand.

By the way 3:
Matt shared a link to the article he posted on the Art Of Manliness, because I invited him to do so. Thought I'd mention this, before anyone got the idea he came here only to shamelessly plug this link and business.

By the way 4: in case not everyone noticed it yet. We're in the habit of speaking frankly, over here.

Kind regards,
Bart.


I promise I'm not crying "injustice". I'd just like to see the warnings more emphatically placed. I certainly wouldn't stop someone from doing what they wish (so long it doesn't harm someone). I'm sorry to see that this has devolved into a "holy war".
2011-06-16 20:32
Avatar
Torben Pedersen (torbenbp)
Researcher
From: Denmark
Posts: 1005
:scared: Hehe..Thanks Sir Bart...you just whooped some ass.

However I fully agree with you. It`s still razors we`re talking about,not more vitale things like :rocket science,females,space science and women,splitting atoms,good looking dames and fine broads,getting closer to God (she is a good looking female) etc.

It`s razors...a piece of steel. If you do not appreciate the history behind the steel,it`s no more than so. A piece of steel..However some people tend to collect theese pieces of steel,some for history,some for their value and for gaining profit and a very very few for their usage.

I might have some doubts about people reselling restored razors,but then again I never bought one.
If you do not appreciate the tradition behind straight razor shaving etc. the steel`s completely worthless...and no more than a piece of steel attached to some type of handle.

My dime
Torbs
Torben Pedersen
Moellevaenget 15 2th
7900 Nykoebing Mors
Denmark
"If it works dont break it..?"
2011-06-16 20:45
Avatar
Robin
Posts:
iconBart:
iconRobin:
Links to the MFG entries in SRP's razor database would have been useful.

Links to SRP are never useful. What they accomplish is that they reinforce a forum where a few guys monopolize the truth in function of their own petty agendas (read: business interests). As useful (a fraction of) the information found there may be, it preys upon too many former members who've been silently banned when it so suited those that hold power buttons over there. And that information is mixed with nonsense that serves to lure newly arriving straight razor users into a grotesque kind of consumerism, that I consider far more blasphemous to the nature and tradition of these old-fashioned tools, than the replacement of scales by new ones with unhistorical colors.
I beg to differ. http://straightrazorplace.com/srpwiki/index.php/Category:Bresduck_Inc. is probably the single most useful section of all shaving forums. It contains information about manufacturers (not enough, but quite a few) and razors in their original states. And yes, we put a lot of time and effort into it (and into keeping it free from customised razors).

By the way, I daresay that you could replace SRP with B&B or any other forum name, and would find a more or less large group of people who would wholeheartedly agree. So apart from coming across as petty, the argument is very much pointless. Especially since the razor information sits in the srpwiki, and therefore is rather immune to the social and economical idiosyncrasies found elsewhere on SRP.
iconBart:
I have brought my share of razors back to functional duty. I think I tried the use of elbow power for 2 minutes, before I reached for something that had an electrical cord attached. Can't say I ever looked back. But I would never patronize a fellow who chooses to do it all by hand.
Nothing wrong with power tools per se. But I know from first hand experience that they can wreak havoc on razors, and eyes.

We are, after all, talking about The Art of Manliness, one of my favourite websites. And one which excels in quality and accuracy when it comes to bringing the past to the present. Therefore, I think the comment about restoration vs customisation is in fact warranted. :)

Best regards,
Robin
[Last edited by Robin, 2011-06-16 20:59]
2011-06-16 20:48
Avatar
Jim
Posts: 20
Hey, these guys know the mysterious Master Lee!
One punctuation mark is sufficient to end a sentence.
2011-06-16 21:46
Avatar
bbr6704
From: France
Posts: 55
Fun!? or Scrying topic?!?

First, happy to meet Razor Emporium here, I like the website, the store, the guys, their advices...

And what I don't manage to determin if it's fun or not, is the debate going here and there about razor restauration vs. customisation, and about the "whole collection of stuff required for trying to pretend using a straight"

We've got quite the same in the CCC...

I find it fun, or maybie weird should be the word, to see people both saying "I use a straight because of tradition, using skills and objects from the pas, in an ecological way, and against consumerism, commercial policies of today's cartridge razor manufacturer", and that's why "I need, and you'll have to need, at least 10/20/50/100 differrent razors, brushes, soaps, strop, pastes, stones, after shaves... or you'll be a sad shaver, you wont be able to learn what is whet shaving..."

Consumerism, consumerism, consumerism,

Isn't this you were runing away from?

I'm personnaly definitely for the old way, even if I've allready got way too much razors... I wan't to try restauration : cleaning (not "erasing") the blades, ceaning the scales, only replacing the ones that needs replacement. But is that necessary for shaving? I'm sure no!

And that's why I only got one brush, one soap and a "travel cream tube", one paddle, and one after-shave.

I don't say that's the only truth, I mean, it's enought to get good shave, isn't that we're all looking after?

And I find customisation is vanity, and over all, a lack of respect to razors history (G10 scales, etc, on blades over 200 years... flashy colors on wades...)

I won't go further on this, every one os free to do what he wants to, until it doesn't concern my blades..

That is just my point of view, wanted to share it, hope I'm not too messy in my post...
2011-06-17 11:58